https://campervanvanmotorhome.com Sat, 20 Jun 2026 17:58:46 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://campervanvanmotorhome.com/2026/06/wireless-universal-air-suspension-spring-controller-kit-for-motorhome-campervan/ https://campervanvanmotorhome.com/2026/06/wireless-universal-air-suspension-spring-controller-kit-for-motorhome-campervan/#comments Tue, 02 Jun 2026 15:49:51 +0000 https://campervanvanmotorhome.com/2026/06/wireless-universal-air-suspension-spring-controller-kit-for-motorhome-campervan/






















We know our products. Always the correct part. Wireless Universal Air Suspension Spring Controller Kit For Motorhome Campervan. MaXpeedingrods Wireless Air Spring Bag Compressor Controller Kit for Motorhome Van Pickups. Moreover, it can be pre-set to meet your needs in different situations. At the same time, it can be used with any brand of air spring bags. Universal Fit For Most 1/2, 3/4 And 1 Ton Pickups And Van. For Toyota Hilux 4WD 2015-On. Notice: Air Spring Bag is not included. Installation instruction and User Manual included. Package Length, width and height: 373527 cm. Package Wight: 5.85 Kg/13 LBS. Package includes (as the picture shows). 1 x Compressor control system assembly. 1 x Wireless controller. 1 x Air Line? 61 (12M). 1 x Air filter. 1 x Wire harness (6 M). 1 x Relay harness (1M). 3 x T Connectors. And some other accessories. Single-path controls let you adjust 1 pair of any brand air springs. Heavy-duty compressor, Maximum air pressure is 120 psi. Convenient and quick all-in-one installation. Professionally designed integrated manifold. No air lines or wiring harnesses are required in the cab. A wireless controller can activate the compressor from inside or outside the cab. Three preset values can be customized to meet the needs of different scenarios. The integrated installation can meet the installation requirements of various models. 100% factory tested to be leak free. Recommended working pressure:50-70 PSI. The compressor undergoes rigorous fatigue testing to ensure quality. The air controller kit has passed the rigorous salt spray testing. The connection signal between the remote control and the application APP is very stable within a range of about 20 meters from the vehicle. The wireless remote control is factory matched to be used directly. The recommended operating temperature range is -40? To 85? . Install the product inside the vehicle if operating temperatures regularly fall below 0°C. If too hot, shorten pump runtime and extend cooling time. All modifications must be performed by qualified personnel and in compliance with your local modification regulations. It is important to read and understand the installation instruction before you install it. Press any button for 3S to activate the wireless controller, and the screen will display the last working pressure. Before using the remote control, be sure to install the batteries, which are included in the accessories. After downloading the APP, please make sure that the permission of Nearby devices is turned on. If it is not turned on, it will definitely crash directly. To prevent the vehicle battery voltage from being drained, always operate this system with the ignition on. Q: Why does the kit need to have a power wire to the battery and one into the fuse panel? Do they do different things or could this be 1 wire? A: The one connected to the fuse is needed to activate the system motherboard after the car is ignited, and the one connected to the battery is the power supply line of the air pump. They have different functions and both need to be connected. Q: Why does the compressor not run after receiving the inflate command? A: The compressor duty cycle limits the compressor running time to ensure the life of the compressor. When the compressor exceeds or accumulates a running time of about 3 minutes, the system will not inflate, you need to turn off the engine and wait 10 seconds before restarting. Then, give the pressure setting command again, and the compressor will run normally. The best way is to wait about 15 minutes before running the compressor again. Q: Why is the connection signal not so good? Q: Why does the air pump stop working before reaching the set air pressure? A: In order to prevent the compressor from continuing to work due to air leakage, if the air pressure value does not rise by 10 psi within 30 seconds compared with before, the air pump will stop working and the ignition switch will be turned back on to resume normal function. Q: Will the system automatically inflate when the actual pressure is lower than the set pressure? If the actual pressure is lower than the set pressure about 4psi, the system will automatically inflate. If the actual pressure is higher than the set pressure, no correction will be made. Will this fit my car? Please make sure you have read through the whole listing and paid attention to “note” and “notice”. When will my order be dispatched? What do I do if I have not received my order? Can I amend my order? What do I do if my product is faulty? It will speed up the process if you could provide us some pictures or video to illustrate the issue details. OTHER ITEMS YOU MIGHT ALSO LIKE. Air Suspension KIT with 12V Compressor for Iveco Daily 35S 35L – 4000kg. Air Suspension With Compressor For Mercedes-Benz Sprinter 06-22 4000kg. Air Suspension Spring + Compressor Kit for Mercedes-Benz Sprinter 06-22 4 Ton. Air Bellows + 12V Compressor Kit for Ford Transit 01-24 4000kg Rear wheel Drive. 2500lbs Axle Bags Triangulated + Heavy Duty Steel Bars Weld-On 4 Axle Link Kit.

]]> https://campervanvanmotorhome.com/2026/06/wireless-universal-air-suspension-spring-controller-kit-for-motorhome-campervan/feed/ 0 https://campervanvanmotorhome.com/2023/03/wireless-reversing-camera-7-hd-monitor-truck-camper-van-motorhome-rear-view-kit/ https://campervanvanmotorhome.com/2023/03/wireless-reversing-camera-7-hd-monitor-truck-camper-van-motorhome-rear-view-kit/#comments Wed, 08 Mar 2023 19:04:34 +0000 https://campervanvanmotorhome.com/2023/03/wireless-reversing-camera-7-hd-monitor-truck-camper-van-motorhome-rear-view-kit/













This is a professionally designed system with industrial leading components/parts. High quality and reliable. 7 inches HD TFT LCD widescreen monitor with built-in 2.4GHz wireless receiver for RV Truck. The colour camera has a viewing angle of 120 degrees. Camera is water proof. Rearview night vision IR reverse camera has 18 individual infrared (IR) LED, 10m effective range, helping your view still clearly at night or in bad weather. Waterproof camera body with a sun-visor and metal bracket. Easy to mount on any flat surface of the vehicle. The camera has the wireless sender inbuilt so you just need to connect the camera to the reversing lamp power. Wireless parking assistance, the monitor will start up automatically and synchronously display the video from rearview camera when you’re backing your car. Hard metal cased camera, IP 67 waterproof grade, waterproof and mud proof. Easy to install and operate. Comes with mounting bracket for easy installation. Remote control is powered by button cell (Battery is not included). 100% Brand New and High Quality. Rear view camera turns on automatically when vehicle is put on reverse gear. You can also turn it on while driving by pressing the button on the monitor – great feature for driving large vehicles. The screen has a built-in wireless 2.4 GHz video receiver so you can receive picture directly on the screen. 12V-24V DC power input range to fit most medium to large vehicles on the road. Display Screen: 7 inches 16:9. Operating Voltage: 12V/24V DC. Transmission Distance: 15 meters. (Actual receiving distance has an effect due to physical interference and electronic interference). Compression Format: MPEG 4 video. Transmission Speed: 12 Mbps. FHSS: Frequency Hopping Spread Spectrum. Resolution: 800RGB x480 dots. TV System: PAL / NTSC. Metal body with bracket for easy installation. Operating Voltage: 12/24V DC. Standard NTSC: 510 492 pixels, PAL: 510 582 pixels. Minimum Illumination: 0Lux (LED ON). 1 x Wireless 7 Car Monitor. 1 x Wireless Backup Camera. 2 x Power Cable. 1 x Remote Controller. Upgraded Easy Setup Wireless Backup Camera and Monitor Kit For Car RV Truck Bus Caravan Bus Motorhome. Use as a Full-Time Rear View Monitor When connect the camera to 12V-24V, so it could also used as security monitor. Use as a Car Back-Up Monitor When connect the camera to reverse light. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Advanced Driver Assistance Systems\Parking Assistance\Parking Cameras”. The seller is “huacang” and is located in this country: GB. This item can be shipped to United Kingdom, Ireland.

• Detection Angle: 95°
• Compatible Vehicle Make: AC
• Items Included: Camera, Monitor, Mounting Brackets
• Material: Metal, PVC
• Placement on Vehicle: Rear
• Colour Camera: Yes
• Colour: Black
• Brand: Unbranded
• Type: Number Plate Camera
• Manufacturer Warranty: 1 Year
• Attachment Type: Clip-On
• Connectivity: Wired, Wireless
• System Standard: NTSC
• Features: Distance Lines, Night Vision, Waterproof, Marine/Waterproof
• Country/Region of Manufacture: China
• Universal Fitment: Yes
• EAN: 770523250366

]]> https://campervanvanmotorhome.com/2023/03/wireless-reversing-camera-7-hd-monitor-truck-camper-van-motorhome-rear-view-kit/feed/ 0