https://campervanvanmotorhome.com Wed, 15 Apr 2026 11:57:34 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://campervanvanmotorhome.com/2023/10/4ft-wide-34-three-quarter-sliding-rock-and-roll-camper-van-bed-motorhome/ https://campervanvanmotorhome.com/2023/10/4ft-wide-34-three-quarter-sliding-rock-and-roll-camper-van-bed-motorhome/#comments Thu, 05 Oct 2023 12:11:35 +0000 https://campervanvanmotorhome.com/2023/10/4ft-wide-34-three-quarter-sliding-rock-and-roll-camper-van-bed-motorhome/








Due to popular demand we’ve now introduced the. 6ft x 4ft “3/4″ Rock and Roll Bed. 120cm wide x 180cm long. Offset design fits between the wheelarches at the rear of the van. Made from moisture resistant MDF. If you need it quicker give us a call: 07719 111601. Can be modified for shorter vans by trimming up to 100mm from the trailing edge of the bed platform. Our amazing new design features. Super-easy opening and closing. Large underneath storage area. Made from quality 15mm moisture resistant MDF, supplied flat-packed. Takes about half an hour to assemble using professional German-engineered fixings. Width 120cm x Depth 97cm x Height 90cm. Width 120cm x Length 180cm x Height 40.5cm. Wheelarch clearance: 39cm high (height of bed platform) x 20cm deep. To check whether this will fit you should measure from the passenger wheelarch side to the drivers side cabinets. If the gap is more than 100cm wide this bed should fit. Check that there aren’t any other protrusions such as fridges that will interfere when the bed is open. MATTRESSES ARE NOT INCLUDED IN THE SALE. This seat/bed should not be used while the vehicle is in motion. We do not provide any fittings to secure the bed to your vehicle. Intellectual Property Office registered design number: 6061705.

]]> https://campervanvanmotorhome.com/2023/10/4ft-wide-34-three-quarter-sliding-rock-and-roll-camper-van-bed-motorhome/feed/ 0 https://campervanvanmotorhome.com/2020/10/superb-birch-plywood-34-three-quarter-rock-and-roll-camper-van-bed-motorhome/ https://campervanvanmotorhome.com/2020/10/superb-birch-plywood-34-three-quarter-rock-and-roll-camper-van-bed-motorhome/#comments Fri, 09 Oct 2020 17:16:27 +0000 http://campervanvanmotorhome.com/2020/10/superb-birch-plywood-34-three-quarter-rock-and-roll-camper-van-bed-motorhome/






3/4 Rock and Roll Campervan Bed. 110cm wide x 180cm long. Due to popular demand we are now listing our Baltic birch plywood beds. This material is extremely durable, whilst having an attractive finish with a very low risk of splinters. We finish all our beds with a small routered radius on the edges which makes them easy on the eye and pleasant to handle. Offset design fits between the wheelarches at the rear of the van. Can be modified for shorter vans by trimming up to 100mm from the trailing edge of the bed platform. Our amazing new design features. Super-easy opening and closing. Large underneath storage area. Made from quality 15mm birch plywood, supplied flat-packed ready for you to paint, stain or wax. Takes about half an hour to assemble using professional German-engineered fixings, not silly plastic blocks. Width 110cm x Depth 97cm x Height 90cm. Width 110cm x Length 180cm x Height 40.5cm. Wheelarch clearance: 39cm high (height of bed platform) x 15cm deep. To check whether this will fit you should measure from the passenger wheelarch side to the drivers side cabinets. If the gap is more than 95cm wide this bed should fit. Check that there aren’t any other protrusions such as fridges that will interfere when the bed is open. This seat/bed should not be used while the vehicle is in motion. We do not provide any fittings to secure the bed to your vehicle but there are a range of very strong angle brackets available from the likes of Screwfix. Intellectual Property Office registered design number: 6061705. The item “Superb birch plywood 3/4 Three quarter rock and roll camper van bed motorhome” is in sale since Thursday, May 28, 2020. This item is in the category “Vehicle Parts & Accessories\Motorhome Parts & Accessories\Campervan & Motorhome Parts”. The seller is “camperluxe” and is located in Worksop. This item can be shipped to United Kingdom.

• Manufacturer Part Number: Does Not Apply
• Country/Region of Manufacture: United Kingdom
• Brand: Camperluxe
• Featured Refinements: Camper Bed

]]> https://campervanvanmotorhome.com/2020/10/superb-birch-plywood-34-three-quarter-rock-and-roll-camper-van-bed-motorhome/feed/ 0 https://campervanvanmotorhome.com/2020/05/34-three-quarter-sliding-rock-and-roll-camper-van-bed-motorhome-3/ https://campervanvanmotorhome.com/2020/05/34-three-quarter-sliding-rock-and-roll-camper-van-bed-motorhome-3/#comments Tue, 26 May 2020 11:21:50 +0000 http://campervanvanmotorhome.com/2020/05/34-three-quarter-sliding-rock-and-roll-camper-van-bed-motorhome-3/









3/4 Rock and Roll Campervan Bed. 110cm wide x 180cm long. Made from moisture resistant MDF. Offset design fits between the wheelarches at the rear of the van. Can be modified for shorter vans by trimming up to 100mm from the trailing edge of the bed platform. Our amazing new design features. Super-easy opening and closing. Large underneath storage area. Made from quality 15mm moisture resistant MDF, supplied flat-packed. Takes about half an hour to assemble using professional German-engineered fixings, not silly plastic blocks. Width 110cm x Depth 97cm x Height 90cm. Width 110cm x Length 180cm x Height 40.5cm. Wheelarch clearance: 39cm high (height of bed platform) x 15cm deep. To check whether this will fit you should measure from the passenger wheelarch side to the drivers side cabinets. If the gap is more than 95cm wide this bed should fit. Check that there aren’t any other protrusions such as fridges that will interfere when the bed is open. This seat/bed should not be used while the vehicle is in motion. We do not provide any fittings to secure the bed to your vehicle. Intellectual Property Office registered design number: 6061705. The item “3/4 Three quarter sliding rock and roll camper van bed motorhome” is in sale since Wednesday, May 13, 2020. This item is in the category “Vehicle Parts & Accessories\Motorhome Parts & Accessories\Campervan & Motorhome Parts”. The seller is “camperluxe” and is located in Worksop. This item can be shipped to United Kingdom.

• Manufacturer Part Number: Does Not Apply
• Country/Region of Manufacture: United Kingdom
• Brand: Camperluxe
• Featured Refinements: Camper Bed

]]> https://campervanvanmotorhome.com/2020/05/34-three-quarter-sliding-rock-and-roll-camper-van-bed-motorhome-3/feed/ 0 https://campervanvanmotorhome.com/2020/05/34-three-quarter-sliding-rock-and-roll-camper-van-bed-motorhome-2/ https://campervanvanmotorhome.com/2020/05/34-three-quarter-sliding-rock-and-roll-camper-van-bed-motorhome-2/#comments Thu, 07 May 2020 17:26:34 +0000 http://campervanvanmotorhome.com/2020/05/34-three-quarter-sliding-rock-and-roll-camper-van-bed-motorhome-2/









Update: During the current crisis we are now dispatching only on a Wednesday so we can send all our parcels at once. We use TNT Express so you should receive your item on a Thursday, or Friday at the latest. Orders received after 1pm Tuesday will not be dispatched until the following week. If you would prefer to collect you can do so any day but please give us three days notice. All collections to be paid in advance to maintain social distancing. Thank you for your patience and please stay safe. 3/4 Rock and Roll Campervan Bed. 110cm wide x 180cm long. Made from moisture resistant MDF. Offset design fits between the wheelarches at the rear of the van. Can be modified for shorter vans by trimming up to 100mm from the trailing edge of the bed platform. Our amazing new design features. Super-easy opening and closing. Large underneath storage area. Made from quality 15mm moisture resistant MDF, supplied flat-packed. Takes about half an hour to assemble using professional German-engineered fixings, not silly plastic blocks. Width 110cm x Depth 97cm x Height 90cm. Width 110cm x Length 180cm x Height 40.5cm. Wheelarch clearance: 39cm high (height of bed platform) x 15cm deep. To check whether this will fit you should measure from the passenger wheelarch side to the drivers side cabinets. If the gap is more than 95cm wide this bed should fit. Check that there aren’t any other protrusions such as fridges that will interfere when the bed is open. This seat/bed should not be used while the vehicle is in motion. We do not provide any fittings to secure the bed to your vehicle. Intellectual Property Office registered design number: 6061705. The item “3/4 Three quarter sliding rock and roll camper van bed motorhome” is in sale since Tuesday, April 7, 2020. This item is in the category “Vehicle Parts & Accessories\Motorhome Parts & Accessories\Campervan & Motorhome Parts”. The seller is “camperluxe” and is located in Worksop. This item can be shipped to United Kingdom.

• Manufacturer Part Number: Does Not Apply
• Country/Region of Manufacture: United Kingdom
• Brand: Camperluxe
• Featured Refinements: Camper Bed

]]> https://campervanvanmotorhome.com/2020/05/34-three-quarter-sliding-rock-and-roll-camper-van-bed-motorhome-2/feed/ 0 https://campervanvanmotorhome.com/2020/03/34-three-quarter-sliding-rock-and-roll-camper-van-bed-motorhome/ https://campervanvanmotorhome.com/2020/03/34-three-quarter-sliding-rock-and-roll-camper-van-bed-motorhome/#comments Tue, 17 Mar 2020 07:12:55 +0000 http://campervanvanmotorhome.com/2020/03/34-three-quarter-sliding-rock-and-roll-camper-van-bed-motorhome/









3/4 Rock and Roll Campervan Bed. 110cm wide x 180cm long. Made from moisture resistant MDF. Offset design fits between the wheelarches at the rear of the van. Can be modified for shorter vans by trimming up to 100mm from the trailing edge of the bed platform. Our amazing new design features. Super-easy opening and closing. Large underneath storage area. Made from quality 15mm moisture resistant MDF, supplied flat-packed. Takes about half an hour to assemble using professional German-engineered fixings, not silly plastic blocks. Width 110cm x Depth 97cm x Height 90cm. Width 110cm x Length 180cm x Height 40.5cm. Wheelarch clearance: 39cm high (height of bed platform) x 15cm deep. To check whether this will fit you should measure from the passenger wheelarch side to the drivers side cabinets. If the gap is more than 100cm wide this bed should fit. Check that there aren’t any other protrusions such as fridges that will interfere when the bed is open. This seat/bed should not be used while the vehicle is in motion. We do not provide any fittings to secure the bed to your vehicle. Intellectual Property Office registered design number: 6061705. The item “3/4 Three quarter sliding rock and roll camper van bed motorhome” is in sale since Monday, October 7, 2019. This item is in the category “Vehicle Parts & Accessories\Motorhome Parts & Accessories\Campervan & Motorhome Parts”. The seller is “camperluxe” and is located in Worksop. This item can be shipped to United Kingdom.

• Country/Region of Manufacture: United Kingdom
• Manufacturer Part Number: Does Not Apply
• Brand: Camperluxe
• Featured Refinements: Camper Bed

]]> https://campervanvanmotorhome.com/2020/03/34-three-quarter-sliding-rock-and-roll-camper-van-bed-motorhome/feed/ 0