Due to popular demand we’ve now introduced the. 6ft x 4ft “3/4″ Rock and Roll Bed. 120cm wide x 180cm long. Offset design fits between the wheelarches at the rear of the van. Made from moisture resistant MDF. If you need it quicker give us a call: 07719 111601. Can be modified for shorter vans by trimming up to 100mm from the trailing edge of the bed platform. Our amazing new design features. Super-easy opening and closing. Large underneath storage area. Made from quality 15mm moisture resistant MDF, supplied flat-packed. Takes about half an hour to assemble using professional German-engineered fixings. Width 120cm x Depth 97cm x Height 90cm. Width 120cm x Length 180cm x Height 40.5cm. Wheelarch clearance: 39cm high (height of bed platform) x 20cm deep. To check whether this will fit you should measure from the passenger wheelarch side to the drivers side cabinets. If the gap is more than 100cm wide this bed should fit. Check that there aren’t any other protrusions such as fridges that will interfere when the bed is open. MATTRESSES ARE NOT INCLUDED IN THE SALE. This seat/bed should not be used while the vehicle is in motion. We do not provide any fittings to secure the bed to your vehicle. Intellectual Property Office registered design number: 6061705.